Monday, May 07, 2007

The REAL reason re-creationists do what they do...

... and home machinists, and home smiths, and handymen, and....

Let's just say there are a lot of folks with ... useful ... skills out there.

Anyway, what inspired the thought was, I was going through my mp3s and saw these two that I haven't seen for a while (you can download both here):
Serious Steel
Copyright ©1993 by Leslie Fish

Oh, the bombs went up, and the crunch came down, in the middle of the Pennsic War.
It left us stranded in Cooper's field, ten thousand souls and more.
We had nothing with us but what we'd brought: our cars and our camping gear
And our arms and armor, tools and skills, that we'd worked on all that year.

Chorus:
So dress your ranks, lift your pikes,
Tight as the teeth of a comb.
Rattling, clanking, down the road,
The War is going home.
So a truce was called, and a council held, and we argued all that night.
Then we all set off in a caravan by the early morning light.
We had tipped our arrows and pikes with steel, and were armored, every one.
Our swords and bows hung ready to hand, for the time of rattan was done.

The very first town that we came to, we stopped for fuel and food.
The gas-man said he had none to sell. The cops were worse than rude.
They drew their guns. We drew our bows. They fired. We won the day-
For their back-up radios all were dead...and shortly, so were they.

The very next town that we came to, they had no fuel at all.
The mechanics said they could change our cars to run on alcohol.
But a thousand cars would take as long as to grow a crop of grain,
So we made a deal, and moved on out in a horse-drawn wagon-train.

The very third town that we came to, the rulers had gone mad.
The cops tried to enslave us all and steal what-all we had.
Our armor proved half bullet-proof: our weapons worked as well.
The townsfolk afterwards thanked us all for freeing them from hell.

So-town by town we worked our way, just to take our people home.
The legends that we left behind, it seems, would rival Rome;
For now the folk come seeking us to take their troubles on,
To be their teachers and champions in a world where law is gone.

How can we not take up the steel to serve our people's need?
How can we leave our land to fall to any bandit's greed?
We have the skill to save our folk from whatever evil thrives, ...and...
Admit the truth-this is the chance we've hoped for all our lives!

So dress your ranks, lift your pikes
Tight as the teeth of a comb.
Rattling, clanking, down the road
Dressed in leather and steel and woad,
All too aware of history's load
The War is going home!-
The War is coming home!
And Joe Bethancourt's inspired filk of a filk; rendering very clearly why the SCA is also referred to as "The Society for Consenting Adults" (a note, "bluefeather" is a gay group within the SCA - and they are usually great fun to party with, this is intended as a joke not an insult.):
Serious Steal
(c) copyright 1994 W.J. Bethancourt III
(Tune: "Serious Steel" by Leslie Fish)

Well our girlfriends up and left us cold
In the middle of Estrella War
And left us stranded in the middle of the field
And we thought it a crashing bore!

We had nothing with us but what we'd brought,
Our cars and our camping gear,
A box of condoms and some toys
And a warm six-pack of beer
CHORUS:
So grab your pants, find your socks
Brush your teeth with a comb
If you can't get laid at Estrella War
You might as well go on home!
So we went back to our lonely camp
And we spent a horny night.
Then we all lined up at the showers and
We washed in the morning light.

We dressed up in our finest clothes
Our swords had sheaths at hand
And we went off hunting maidenheads
A happy, horny band!

The very first lady that we found
She was a Duchess bold
She said she had no maidenhead,
But her camp was down the road .....

So we took her back to her jolly old camp
Her maidenhead to find
She gave her all to help our search
From Vespers to Compline!
CHORUS:
So grab your pants, find your socks
Brush your teeth with a comb
If you can't get laid at Estrella War
You might as well go on home!
The very next camp that we came to
The ladies had gone mad.
Their lords had joined Blue Feather
And that was all they had.

Our armor proved out bullet-proof
Our weapons worked as well.
Their lords they thanked us long and loud
For saving them from Hell.
CHORUS:
So grab your pants, find your socks
Brush your teeth with a comb
If you can't get laid at Estrella War
You might as well go on home!
Camp by camp we worked our way
Just to see who we could lay.
The legends that we left behind
Were a Roman holiday!

For now the ladies seek us out,
For to take their troubles on,
And be their bedmates thru the night
When'e're their lords are gone!
CHORUS:
So grab your pants, find your socks
Brush your teeth with a comb
If you can't get laid at Estrella War
You might as well go on home!
How can we not take up this task
To serve our ladies' need?
How can we leave them all alone
When we hear them beg and plead?

We spent our time at the War in bed,
We had 'em by threes and fives!
And we gotta say this was a War
We'd hoped for all our lives!
CHORUS:
So grab your pants, find your socks
Brush your teeth with a comb
If you can't get laid at Estrella War...
If your sex life is a crashing bore...
And all you can find is a two-bit .... (WHAT?!)
Well ..............

You might as well just go home!


(lyrics to a couple more of Joes songs here)

Happiness is a clear conscious

Bug Report

Click for full size, and hie thee hence:

Hmmm... should I bother upgrading...

Well... my main desktop PC has set relatively unmolested by upgrades (excepting a parts replacement or two) since I bought it back in 2003. I've upgraded my monitor to a top of the line 19" NEC LCD, but I havent really messed with the core PC hardware.

Thing is, it hasn't particularly needed it. It's an Athlon XP 3200+, with a gig of DDR RAM (it had 2 gigs, but one of the sticks fried for some reason so I put the other stick in something else and tossed 2x512 in there), an ATI all-in-wonder 9700 pro, 2x DVD writers, and 2x 500gb 8mb cache ATA133 hard drives.

For everything but the most intense games, it's still just fine.

Now, I'm planning on buying a new godbox some time later this year or early next; when the new quad core Athlons and the first generation or REAL quad core pentiums settle down price wise (they're both schedule to come out in September or so). Dual quads with 4gb of the fastest ram available sounds about right (and yes, I can actually use that many cores for some things; especially when I'm booting into linux).

I'm also planning on giving my in laws my old PC..., and buying Mel and the girls a new one...

'cept with the price of barebones PCs these days, I can toss something perfectly acceptable to my father in law for $300-$400.

Amazing what the market has done isn't it? Since they haven't been able to make PCS very much faster the last few years, but no-one has repealed Moores law; the price of respectable computers has dropped dramatically.

So anyway, I'm starting to think about instead of giving my father in law the old PC, just upgrading it, and keeping it. I'm just trying to decide whether to bother or not.

Half the reasoning behind this by the way is because I don't feel like completely reinstalling the box... unfortunately it kinda needs it; since I haven't done it in 2.5 years.

Anyway, it is the last of the generation of motherboards before pci-E video cards so it's AGP, and it's DDR only, no DDR 2. Also it's a socket A motherboard, with the fastest socket A processor in it; so if I want to upgrade the proc it means upgrading the mobo.

That said, the last generation of ATI AGP cards tops out with the x1950, and you can pick one of the AGP versions up for $150 (the PCIe are more expensive, but much faster), and a decent TV tuner card for $100.

That pretty much multiplies the graphics horsepower by a factor of 4.

My motherboard supports up to 4gb of ram (the max winblows can use anyway) ; and these days 2x 2 gig sticks can be had for under $200.

My I/O performance is just fine; I'm not worried about the drives performance being a generation behind, and a TB is plenty of space for this computer. The only big things I'm doing on it are storing the occasional video rip (all in wonder card is there for a reason), and as a cd-image and backup store.

Honestly, I need to set up an external TB array to act as a backup and filing systems for all our PCs. I used to run a backup and file server; but since we moved here I haven't bothered, because I simplified down to two laptops and the desktop (I have about 9 computers I just don't use the other ones anymore). One of the laptops runs Linux as a dumb net terminal and the other is a work owned machine, so I don't do backups on either one any more

Ok, so $450 maxes my RAM and video card, and leaves me with the fastest single core 32 bit athlon.

Honestly, that's not a bad deal. Even buying my in laws the bare bones deal I was going to get for Mel and the kids ($300 plus abother $150 for bits and bobs), I think I'd come out ahead on money. The only thing is, this computer is a dead end... All of the components are superseded by the next generation of technology, so there's no upgrade overhead.

If I were to BUILD the equivalent box, but on new tech, where would I be and what would it cost me?

Let's start with a baseline, of $450 to upgrade the old box, and $450 to buy a new barebones box for the inlaws; thus $900 total.

Well, I still think Athlon offers better value for the money in the midrange and low end; even though Pentium has had the performance crown since they introduced their last generation of dual cores. So lets stick with Athlon.

At this point, you wouldn't even think of building anything new without dual core, so we're talking Athlon X2, and it makes sense to go with something more futureproof, so that means Socket AM2.

The sweet spot for AM2 procs today is the Athlon 64 X2 4800+ (at 2.5ghz); running about $130.

Now, the AM2 is supported by both several chipsets, but I'm partial to the nForce 500 series. A decent nForce 550 motherboard (the 500 series are without integrated video) can be had for as little as $60, but there are at least a dozen options in the $80 price range. The much better nForce 570 sweetspots right at $100; and there are at least a dozen options there as well.

2x 2 gig ddr2 800 sticks from a reasonable brand will run you just over $200; actually a little less than the non-ddr sticks for the current mobo.

2x 500gb 16mb cache Sata II drives will run you $120 each for any of the major brands, $240 total.

A dual layer DVD burner is about $50, with a second DVD player; probably $40 but lets round the both of them up to $100.

A decent case with a respectable powersupply can be had for $80

That's $750, without video; which I'm saving for last because it's the most complicated question.

The video card market right now (and for the last two years), is just a mess. There are so many infinitesimal differences between products within the same segment, and a half dozen segments within each line...

One would have thought that reducing the major players in the market down to just nVidia and ATI/AMD (if you haven't been paying attention AMD bought ATI last year) a few years back would have simplified things.

One would have been wrong in this thought.

Right now, you can buy mainstream graphics cards at every price point from $60 all the way up to $900; for a single card. Even more insane, the top end cards are all designed to be used in a paired configuration.

Hell, the extreme setup today is two graphic processors on a single card, ganged together with another daughter card; both connected to the motherboard through a single slot, with another identical setup in the slot right next to it. Combined the boards have 8 graphics processors, and as much as 4gb of memory; and cost over $2000.

For those of us back on planet earth; this ridiculous top end proliferation, though confusing, has had some great side benefits; in that even the lower mid range cards today are great performers.

The real problem though, is figuring out the sweet spot.

For nVidia cards, the best deal seems to be the GeForce 7900 or 7950, both of which can be had for between $200 and $250 depending on exact configuration. For $300 you can get into the low end of the 8800 lineup; but I don't think that's either necessary or a good value.

The ATI picture is a little tougher to bring into focus; mostly because there are a huge number of configuration options from a dozen vendors (not that the nVidia options are much simpler, they are just all closer together on price and features).

Right now, I think the sweet spot seems to be the Radeon x1900 or x1950, non "crossfire" versions. They are the fastest single GPU cards that ATI has to offer, and are available in configurations from $180, all the way up to $300 from various vendors. More money gets you a higher clock, more and faster memory, and a better heat sink.

In this case, I think the ATI offering is a better deal; and besides, it keeps your video card and your processor from the same vendor (though with a chipset from their direct competitor nVidia... funny how that works out).

The funny thing though? For either vendor, if you only spend $150 on their "mainstream" cards, you'll still get great performance.

Anyway, lets assume $250 on a slight bump down from the top end X1950; and call it a day.

That's $1000, about a hundred more than buying a bottom of the line barebones system for my in laws, and upgrading my existing computer (another $100 if I want another TV card).

Now, for that grand, what do I get?

Well, honestly, that's about 4 times the computer that upgrading would get me...

There is one other option; I could keep my case, power supply, hard drives, and optical drives; and upgrade the existing pc using the other components I mention here; then stick my old components in a cheap new case, and add DVD and hard drive.

So, the box, DVD, and hard drive; plus bits and bobs to make the whole thing usable with my old hardware; would run something like $250.

Then, replacing my motherboard, processor, and memory, and keeping the case, hard drives, and optical drives, would run me about $700.

$950... saving me maybe $50 over building the whole thing as new, and that's keeping my old hard drives (which are fine, but slower and of an older technology base). Probably not worth it.

So I guess it is worth it to buy new, and I really shouldn't bother upgrading... but damnit I don't feel like wiping my old box, and installing everything on the new one...

Now just wait 'til you see the agonizing I'mna go through when I go to build my god box... I'm still not sure if I'm going to say "Screw it all, I'm buying a damn Mac".

Mise En Place

Which means, roughly, "all my stuff in its place" (literally translated it means "setting in place" or "installation in place"). It's a term cooks use for the setup they cook with.

Most experienced cooks develop a layout and a group of seasonings, oils, sauces, spices etc... that they like to have around; preferably in the same spot and same arrangement every time you cook; so that when you need to reach for something quickly, it's immediately to hand.

If you're lucky you can find bottles and jars and a tray that can hold it all conveniently; and can be easily moved around from workstation to workstation.

Now, what's in it... and this is a HIGHLY personal thing to different cooks, some of whom don't want to tell anyone their "secrets", but I really think that's silly.

My mise contains:

  1. Bacon Grease
  2. Tabasco sauce
  3. Franks Red Hot
  4. Soy sauce (natural brewed)
  5. Light olive oil
  6. Cider vinegar
  7. Malt vinegar
  8. Red wine vinegar
  9. Pepper grinder (fresh black peppercorns)
  10. Lemon juice (for when I want to deglaze or summat, and don't want to use fresh)
  11. Steak sauce (I make my own, but I use an A1 base)
  12. BBQ sauce (I make my own with molasses, coffee, maple syrup, tomato paste, brown sugar, franks red hot, mustard, and various spices)
  13. Blended natural wasabi, horseradish, and mustard powder
  14. Extra Virgin Olive Oil
  15. Balsamic vinegar
  16. 1lb of softened butter
  17. Onion salt
  18. Cumin
  19. Cracked black mustard seed
  20. Chinese hot mustard (ground)
  21. Celery salt
  22. Chili oil
  23. Dijon mustard
  24. Cayenne powder
  25. Kosher salt
  26. Smoked spanish paprika
  27. Garlic powder
  28. Turmeric
  29. Kosher salt
  30. Oregano (dried)
  31. Basil (dried)
  32. Rosemary (dried)
  33. Rhyme (dried)
  34. Parsley (dried)
  35. Sage (dried)
  36. Crushed red pepper
  37. Pickled peppercorns
At my workstation I of course have my knife, two cutting boards, various measuring cups and spoons, an instant read and a probe thermometer, a bowl of fresh garlic, and a magnetic spice tin rack with the spices and dried herbs

A cooks workstation, is their preparation and cooking area, including their mise, and everything surrounding it, and this is my workstation:


It's a basic four burner hooded range, with a wall oven next to it. Theres a pullout counter under the countertop where the mise tray is sitting.

When I'm cooking, the mise itself sits on the bottom shelf of the cabinet above it; leaving the counter space clear for staging and prep work. I usually have a cutting board there for prep.

Oh, and side towels, lots and lots of side towels. I always tell Mel to buy plain white ones (because they can be bleached), but for some reason she keeps insisting on buying patterns and colors. Ehhh women.

The fridge is off to the right, and the sink, microwave, another work counter, the other wall cabinets, and the stand mixer station are all right behind my primary workplace.

There's a principle in kitchen design called the "work triangle" which is a triangle between your cooking station, your food storage, and your prep station; with easy access to all three, and good lighting. I've got a pretty good work triangle here.

All the small appliances are either on the counter (out of the way of the workspace), or directly under it. All the pans and bowls are in easy reach under the counters.

There is also a walk in pantry with full height wall shelving (actually Ikea Gorm utility shelving, which works great), and a water cooler in it (also the washing machine and dryer, and a space that will hold a chest freezer by the end of next month.).

Overall, it's a good place to work; though a bit smaller than I'd like. The fridge is a bit too small (and not very cold), and I'd also prefer to have a gas range and a double oven. Other than that though, it's a great place to cook.

Sunday, May 06, 2007

A Light In The Darkness


Just a neat little effect created by taking a tightly focuses picture of an indirect shaded floodlight in my living room. I used the shortest possible exposure that my camera is capable of (1/4000th), with the widest aperture the lens is capable of when zoomed to 135mm (f5.6), and with the sensitivity set to ISO 1600.

You can see some of the noise from going up to 1600; but I think it adds nicely to the effect. Unfortunately bloggers image compression adds a ton of noise and pixelation; but click the pic and you'll get an 800x600 version direct from my web site (still there are some JPG artifacts, but I'm not putting an uncompressed image up).

Saturday, May 05, 2007

Cahfee Cultchah

I'm a HUGE coffee drinker. When I was a teenager, and through my time in the Air Force, I used to drink several pots of coffee a day.

Note, that's POTS not cups.

I reckoned my consumption was something on the order of two gallons of coffee on an average day. Unfortunately when my UC became an issue in my mid twenties I had to cut down my coffee consumption a hell of a lot; but most days I'll still have something like a pint or quart of coffee (one or two 16 oz large mugs).

Now, for those of you not regular readers, I was born and raised in Boston, and the Boston area (all over the south shore). In Boston, coffee means Dunkin Donuts. They're utterly dominant, with at least five times as many Dunkins as Starbucks.

...and that's a GOOD thing.

My friend SeekHer (a conservative Canadian/Israeli jew, with an American wife, and 10 daughters; who makes me look like a gun fearing wussie) posted something on the gunthing.com forums today that inspired me:

SeekHer - 05 May 2007 03:29 AM

Here Starbucks are a rarity because our normal coffee shops come doughnut shops serve better coffee then they do and at half the cost…
The local coffee come doughnut shop he's referring to is of course Tim Hortons; the biggest restaurant chain in Canada (there are more Tim Hortons in Canada than there are McDonald's). Timmys is a bit of a national symbol in Canada (for good or ill), and is a huge part of Canadian pop culture.

I still think Dunkin Donuts has better coffee than Tim Hortons; but he's got a point. Either have better coffee than Starbucks; and have since the 60s.

If you order actual coffee from Starbucks (as opposed to an espresso drink) what you get is poorly blended (20% or more robusta; some blends over 50%) over roasted and over extracted crap.

Both Tim Hortons, and Dunkin Donuts give you smooth coffee of a reasonable strength (as compared to typical restaurant coffee which is essentially brown water) , that is bright without being too acidic, and has body without being too bitter. My only wish is that they would make it a bit stronger.

Now, I'm not saying this is great coffee. COmpared to the good stuff I brew at home, or you get from a really good cafe, it's bland and weak. But for breakfast coffee, or something in the middle of the night, I WANT smooth, and mild but still flavorful coffee, and it fits the bills (though like I said, I wish it were stronger).

What’s amazing to me is that in general, both chains have been able to maintain consistently good standards throughout their huge expansions (combined they make up 70% of the north American coffee market. Starbucks is about 20%, with the rest going to “everyone else"). Both chains had falloffs in quality in the early 80s; but the competition from Starbucks in the 90s drove both to bring their standards and consistency back up to where they were before the decline.

The only problem I have with Dunkins, is that smaller stores don't make their own donuts (yes, that's how they spell it), they have them trucked in from central hubs; so they aren't served hot, and they can get stale over the course of the day. Krispy Kreme has them all over on the hot and fresh scale (but their coffee sucks. Way too bright, and bitter without body or flavor).

Now I just wish Tim Hortons would expand more in the U.S. Right now, with something like 150 stores here, you can only get them in the north east and northern mid west (even better, start serving Tim Hortons coffee and breakfast foodin Wendys - which they own - and I'd eat at Wendys a lot more).

Seriously, Dunkins could use the competition.

Almost ten years ago I took my then new (now long time Ex) wife and her mother on a bus tour of Boston. One thing our driver pointed out was that there are 18 Dunkin Donuts locations visible from Boston Common and the public gardens; and that there is one spot (center of park street, between beacon and Tremont) where you can see 8 different Dunkins if you look in every direction.

And that was 10 years ago.

They first made their massive expansion in New England (they were founded in Quincy Mass, and are headquartered in I think Braintree), then they started spreading out.

Dunkins is planing on having 15,000 stores worldwide by 2015 and 20,000 by 2020; 14,000 of them in North America. They currently have 10,500 stores, 7500 of them in the US (actually less stores than Starbucks, but a great volume of Coffee sales)

When I moved back to Arizona from Ireland in 2003 Dunkin Donuts had JUST started moving in to AZ. There are so many New Englanders down here who were buying DD coffee beans and bringing them back it was ridiculous (this was before they sold it online). Every time you went back to visit family the request all your friends and neighbors had was to bring back bags of coffee (and Wise potato chips, and Ah-So sauce for some reason).

Now there are a half dozen within easy drive of my house.

Oh and I should note, I’ve been writing this while sipping a Dunkin Donuts “Great One” (24oz) hazlenut, light and sweet (one extra half and half, and one extra sugar). It’s what I have instead of breakfast. My body doesn’t like solid food before lunch time usually.

Of course like Tim Hortons, and Starbuks, Dunkins is apart of popular culture; at least in Boston.

There’s a whole ordering language for Dunkins if you’re from New England, but it’s a lot simpler than the “fritalian” bullshit at Starbucks.

What you need to remember is ordering a “regulah” (there are no “r"s at the end of words in New England) will give you a medium (16oz) plain coffee with two tablespoons of half and half and two heaping teaspoons of sugar.

A lahge regulah is a large coffee (20oz) with three half and half, and three sugar.

A “great one” regulah is the largest size (24oz) with 4 half and half, and 4 sugars.

If you order a small (12 oz) you are clearly a communist or a dirty hippy, and shouldn’t be served.

Ordering “light” gets you one extra half and half, “extra light” gets you two. “Sweet” gets you one extra sugar, “extra sweet” gets you two.

One inconsistency is that some stores add one more half and half and one more sugar by default (and give you two and four more for extra) when you order a “great one”.

Ordering “one and one” gives you just one tablespoon of half and half, and one teaspoon of sugar. “Two and Two” likewise.

If you order it “milk” you are supposed to get milk instead of Half and Half, but sometimes they screw that up (actually, most of the time in my experience); and they don’t have full cream.

That's OK though, because the only valid use for Half and Half is in coffee... well and sometimes in dessert making.

I admit, I have been disappointed in the past; because some stores outside of New England don’t teach their staff the “language”. In Boston they don’t have to, because the pissed off customers will make damn sure they get their orders right.

Anyway, aside from the cultural aspect of it, you know what the best part is though?

The price.

A Dunkins "Great One" is about $2 down here (it's a little cheaper in the Northeast where theres more competition). To get the same amount of a coffee drink I can stand from Starbucks (one of their lattes or Mochas, because the coffee is crap), I need to get a 5 shot Venti; which runs about $6.

Oh and for another $0.50 (or is it $0.70.. I dont even remember, but it's cheap) I can make it a coffee and donut combo, with actual donuts that are actually good; unlike Starbucks where I have to pay $3 for a seven berry nonfat scone or some such crap (to be fair, they have decent brownies, they jsut charge out the nose for them). For an extra $2 I can have a coffee and Sandwhich combo, which a respectable (though microwaved) sandwhich.

Can't get that at a Starschmucks.

Your Friendly Neighborhood All Singing All Dancing Spiderman

So, we saw Spiderman 3 last night.

I really liked the movie; but...

I think having what is possibly the most expensive movie ever made may have gone to Sam Raimis head. Of course it grossed $60 million yesterday alone, so maybe not.

Why do I say went to his head?

Well, for one thing, the entire movie was made as kind of a 1930s through 50s Hollywood style screwball comedy; mixed with a pulp action movie of the same era.

WHICH IS AWESOME!

Seriously it's SOOO cool for the geek in me to see that. Pretty much Raimi was given an unlimited checkbook and told "Go make the movie you've always wanted ever since you were a kid".

...and he did it.

I like it, but it is a BIT much, even for me in some spots.

So, an illustration of what I'm talking about (very slight spoilerage. Skip the next three paragraphs if you don't want to know)

In the middle of the movie Raimi sets up an extended song and dance number, including a street dancing montage a la "saturday night fever"; followed up by Spidey doing a Gene Kelly dancing on the tables bit in a jazz club (It's a reference to a mid fifties movie that I can't remember the name of right now).

No, really.

And then theres the screwball set piece with Bruce Campbell as a Maitre D' in a french restaurant... BRILLIANT!!!

Not to say the movie was all comedy and style. There were some great action set pieces. The pacing in the action sequences was really solid; and they managed the transitions from plot and character into action pretty well.

The only real problem I had (other than the heavy stylization; which like I said is cool, it's just a bit much), was that there is too much movie here.

There are so many different side plots, and vignettes, and plot threads; that the whole thing is a bit too busy, and a bit overwhelming. I would rather have seen the movie simplified a bit.. thinned out maybe; and more time taken to develop those individual threads.

Theres probably three movies worth of really good stuff here, packed in and cut into one (admittedly long at 2hrs 20 minutes) movie.

Okay, lets break it down...

The good:

Thomas Hayden Church was excellent. He played the "dumb comic book villain with a heart" perfectly. Yes, he was chewing on the scenery, but they ALL were, this is a comic book movie.

Tobey Maguire was much less irritating than I usually find him. Or rather, he was less inappropriately irritating (believe me, his character is SUPPOSED to be irritating in this one). Peter Parker is supposed to be an emo-boy pussy, so I get it; it's just one of the least appealing aspects of Spider-Man as a whole for me.

Topher Grace gets a royal ass whipping of epic proportions; and also delivers a decent performance as a comic book villain (not what I'd like to see for Venom honestly, but still good).

Spidey gets MAULED. I mean absolutely pummeled; and shows it. That's the way it should be.

The screwball comedy aspects of the movie are brilliant. J.K. Simmons as J.J. Jameson is spot on again; and played for great comedy. Tobey actually gets to exercise some comedy chops here, as do the supporting cast. The dialogue in these scenes is snappy and fun and very Howard Hawks/Billy Wilder.

The entire 30s-50s (it's a bit of a mashup) hollywood feel that permeates the film is wonderful. If "Superman Returns" could have felt this way it would have been hailed as one of the best movies of the last ten years.

The effects are spectacular; in fact the entire visual design of the movie puts it near the top of all effects movies ever.

If they don't see a best visual effects oscar I'd be amazed, even with Pirates 3 coming out in a few weeks. I just don't see how Pirates is going to be able to do a better job than this. Their effects may be bigger and more overwhelming (though that would be hard to do as well), but theres no way they'll be able to integrate them as well into the full live action, and complicated daylight cityscape exteriors that are in this movie.

You can see where the $265 million went, believe me.

Oh, and a funny thing for FX geeks; the movie opens up with what seems to be a bad CGI shot; and then pulls back to show you it's a TV screen in times square that Peter Parker is watching spidey on. Neat little inside joke there for the VFX artists.

The Bad:

Too much movie. Too many plot lines, too much stuff unexplained, and too many opportunities left unexplored in general.

This also means that the wrapups on a lot of the plotlines were either non-existent, or a bit too neat

The entire Gwen Stacey character was wasted here. Even though it's completely out of the comic canon*, I'm hoping they'll use her more in the next one, Bryce Dallas Howard is worth watching.

* the scene in the other movie where Spidey saves MJ from dropping 20 stories was actually Gwen Staceys death in the comics - and should have been used at some point for Spideys character development in the first or second movie... May still be in the fourth one, who knows.

Maybe the stylization was a bit too much. I liked it, but it might be jarring on folks who aren't big 30s-50s movie fans. Also, with the huge number of plot threads involved, that stylization adds "size" to the movie that a lot of folks might feel makes it too much to swallow.

Like eating too big a meal if you know what I mean.

Sandman got a decent bit of character development; but Venom was little more than introduced in this one. He SEEMS to be killed at the end, but any comic fan knows, if there isn't a body (and sometimes even if there is one), then he aint dead; so I'm guessing that opportunity will be taken for the next movie.

The Ugly:

Well, Tobey Maguire, Topher Grace, and Kirsten Dunst are still irritating as all hell. There's nothing that can be done about that; they are just irritating people.

Special mention for Topher Grace... (spoiler alert) whoever gave this guy a career needs to be painfully eviscerated. He's tolerable as Eddie Brock, but once he gets infected and becomes Venom his inherent suckitude cannot be overcome.

I said above he makes a decent comic book badguy, and he does. He at least gets the slimy smarmy conman aspect of Eddie Brock (though not anywhere close to the physical aspects) but as Venom he just sucks. Venom is a sarcastic, hyper agressive, smartassed, obsessive, badass; Topher Grace is the pussyboy from "That 70s show".

Also, 2 hours and 20 minutes... The move would have been better served if he took 1:45 cut half the plotlines and subplots out of this one, and used them in the next one.

The Conclusion:

Seriously, it's a really good movie. It's fun, it's funny, it's fast, it's furious, it's feeling... Yes I'm doing this deliberately as an homage to the classic Hollywood feel of the movie, I'll stop now.

Go see it; I think you'll like it.

From Mel: (to be added later)

Thursday, May 03, 2007

Millionth Page View

So here it is, my millionth page view.



Thank you sir or madam, whoever you may be.

Like a Sheep in Spring





Thats me as of a few minutes ago. It started off as a trim, but hey, it's summer anyway; and what the hell, I was feeling a little shagy after seeing those book signing pics.

Wednesday, May 02, 2007

Author! Author!

So, to cap off my birthday weekend, Monday night I headed out to a book signing for a long time internet acquaintance of mine, John Scalzi.


That's me in dark blue on the right (Scalzis pic), at the book signing in the back of "The Poison Pen" in old town Scottsdale; which by the way is a great independent book store that y'all should check out if you get the chance.

I started reading Scalzi in 2000, and became a commenter on his blog in 2001; then I was one of his "beta testers" for "The Book of The Dumb" (blog readers he asked to reader review parts of the manuscript) in 2002.

So, in internet relationship terms, we're lifelong friends.

Anyway, I'm a regular reader, and semi-regular commenter on his blog, "The Whatever". I'm also a regular reader of Scalzis dead tree based work, thus far consisting of:

Fiction:

Agent to the Stars
(which was actually published online first)
Old Mans War
The Ghost Brigades
The Last Colony
The Androids Dream

Non-Fiction:

Rough Guide to Money Online (it's not Johns fault; it came out just before the .bomb)
Rough Guide to the Universe
Rough Guide to Sci-Fi Movies
Uncle Johns Bathroom Reader Series (various)
The Book of the Dumb
The Book of the Dumb 2
You're Not Fooling Anyone When You Take Your Laptop to a Coffee Shop: Scalzi on Writing

He's been nominated for Hugos twice now (with more most likely coming), and won the John W. Campbell award for best new writer (new as in his first published novel; he'd been writing professionally for 10 years before that).

Let me just recommend all his fiction work to you. If you like Heinlein, Harry Harrison, Keith Laumer, and the rest of the best of American classic Science Fiction, I think you'll like Johns work.

Oh and, fart jokes (you'll get it when you read).

Non fiction.. well I like it, but its a bit subject focuses so to speak. I think most of my readers would like him, but with non-fiction it's hard to tell.

Anyway, biopic over.

I've been to a couple book signings before, but I've not had as much fun at any of them. Lots of audience participation and Scalzis standup like patter. Most of us there were regular readers of "The Whatever" ; which means of course that it was more like a conversation between friends than anything else.

Anyway, I brought my relatively new (this past Christmas) Nikon D80 for John to drool over (he bought the D70 a few months before the D80 came out); and we took some pics that I thought I'd share.

Here's Johns little arms length self portrait... BEHOLD THE POWER OF THE CHIN!!!

And here's a group of the regular blog commenters with Scalzi behind the camera:

And finally, me and John... I swear to god I wasn't thinking of homicide in this picture... I actually LIKE Scalzi after all:

Is he that little, or am I that big?

Yes.

Anyway, a great time was had by all; and the invitation has again been extended to the fine gentleman to have dinner with Mel and I if he gets more than a few hours in town (which is entirely possible because Scalzi is a con circuit regular).

A million page views

Hmmm, looks like either late tonight, or some time tomorrow I'm going to hit a million page views since I installed sitemeter on Feb 14th 2005.

Fun.

I'm at just about 780,000 unique visitors, and I'm averaging around 1500 a day at the moment; so I've got about 4 months before I hit a million unique visitors.

Cool.

Tuesday, May 01, 2007

It's so cute and tiny...

From Aimpoints site:


Micro T-1 - No matter what your mission, the size and weight of your equipment is a critical factor. With the Micro T-1, Aimpoint has introduced an aiming system that provides the performance of our full-sized sights in the smallest package possible.

Built to offer the same battle proven ruggedness as other Aimpoint products, the Micro T-1 is able to perform under extreme conditions while adding negligible weight to your weapon. Suitable for use on Rifles, Carbines, Shotguns, Submachineguns and Handguns, the Aimpoint Micro T-1 is ideal as a stand-alone sight, and can also be “piggybacked” on top of larger magnifying scopes, night vision, or thermal imaging optics. The Micro T-1 can also be used by hunters and sport shooters that need night vision comptability.

The performance of the Micro T-1 is optimized for use with all generations of night vision devices (NVDs), but is especially suited for 3rd generation night vision technology. Aimpoint’s unique band-pass coating on the reflective lens reflects select frequencies of red light at near 100% efficiency in order to give the highest possible dot brightness, while transmitting nearly 100% of light in the Infrared and near-infrared part of the spectrum to provide the clearest, brightest image possible when used with a 3rd generation NVD. With 6 NVD-compatible brightness settings and 7 daylight settings including one extra-bright setting, the Micro T-1 is ready for use around the clock.



Unique features for Micro T-1

Unique features of the Aimpoint Micro T-1

• Ideal for rifles, carbines, shotguns, submachineguns and handguns
• Weight 3.7 oz. (105g) including mount
• 1X (non-magnifying) parallax free optic.
• Compatible will all generations of Night Vision Devices (NVD)
• 6 night vision compatible settings and 7 daylight settings – one
extra bright for use with laser protection glasses or in bright desert sunlight.
• Integral Picatinny-style base allows easy attachment to any rail.
• Patent pending mount is keyed to the sight body to absorb recoil.
• New ACET technology allows 50,000 hours (over 5 years) of constant operation from one battery
• 4 MOA dot
• Hard anodized non-reflective finish.
• Submersible to 80 feet (25 meters)
• Precision adjustments for windage and elevation. Top of protective caps fits into holes on adjustment screws – no other tool required.
• Use as a stand alone sight or “piggybacked” on larger magnifying, thermal, or night vision optics.


Standard features for all Aimpoint® sights
  • Unlimited field of view
  • Parallax-free and unlimited eye relief
  • Unaffected by extreme weather conditions
  • Rugged, durable construction
  • No hazardous materials
  • No laser emission that could be harmful to your eyes
  • Mechanical switch for speed and reliability
  • Increased aiming confidence


Aimpoint also offers 2 other Micro sights. The Micro H-1 and the Micro R-1.



TECHNICAL SPECIFICATIONS

OPTICAL DATA
System Passive Red Dot Collimator Reflex Sight
Magnification 1X
Eye relief Unlimited
Reticle, size 4 MOA
Optical coating Anti reflex and Band Pass coatings, NVD compatible
ELECTRONIC DATA
Battery Type One 3 V lithium battery, type CR2032, commercially available
Battery Life, typical** Over 5 years of continuous (day and night) use at pos 8 of 12 and
Switch, dot brightness 12 settings – 4 NVD and 8 Daylight of which 1Extra Bright,
MECHANICAL DATA
Material housing Extruded, high strength aluminum, hard anodized
Surface finish Black to dark gray, non-glare finish
Material lens covers Rubber, black, non-glare finish
Adjustment Range ±1 m at 100 meters (±1 yds at 100 yds) in windage and elevation,
Mounting Keyed surface Patent pending mount keyed to the sight body to absorb recoil
DIMENSIONS
Length 62 mm (2.4)
Width/height 41 mm x 36 mm (1.6” x 1.4”) for sight only and 41 mm x 40 mm (1.6” x 1.6”) for sight with Mount
Ring width none
Weight 84 grams (3.0 oz) Sight only, 105 grams (3.7 oz) Sight with Mount
ENVIRONMENTAL DATA
Temperature Range -45 oC to +71 oC (-50 oF to +160 oF)
Water resistance 45 m (150 ft.)
Fits on Picatinny rails




Hmmmm, 3.7 ounces, submersible to 25 meters (45m resist), 5 year battery life, built in pic mount, 2.4" long, 1.6" wide, and 1.4" high.

No additional mount required, and it'll co-witness right off the bat... Hell, it wouldn't even stick up higher than my BUIS.

At $650 it aint cheap; but it's a hell of a lot cheaper, smaller, and lighter than a 1.5x ACOG.

Hell the only smaller optic out there is the Docter and it's derivatives; and that isn't in a sealed tube.

Heres a pic of it in Michael Toths (from field and stream magazine) hand:



Oh yeah, I've gotta get one of these.

HT: David Petzals Gun Nut Blog

The A-Max experiment

Last week I talked about the experiment I was going to try with my new heavy barreled AR; and Hornadys 75gr A-Max bullets.

These bullets have a ridiculously high ballistic coefficient for a 75gr because they have a long ballistic tip. They're also a hell of a lot cheaper than other bullets with a comparable BC; like the Berger VLDs that retail for about $0.30 each, as opposed to $0.15 per for the Hornadys.

The problem is, with their very low drag design and thus very long overall length, they are generally considered unsuitable for magazine feeding through an AR platform rifle.

They've been on sale everywhere lately for under $15 a box; so I decided to scoop some up.

I was also looking to pick up some Varget and CCI small rifle primers to load them with at the same time; but they, and every place else within a 40 mile drive of my house, were out of both. In the mean time, I picked up the only powder they had in stock that I thought would be suitable for some test loading; a pound of AA2230; and their last box of Winchester Small Rifle primers.

Given the powder and primers, I'm not expecting world beating accuracy from these loads; what I'm trying to establish is whether I can make these VLD A-Maxes function and mag feed properly.

Anyway, I loaded my first batch of 20 over 23.5gr of 2230, and I seated them to the shortest dimension that didn't put the case mouth too far over the ogive; which turned out to be 2.260". Importantly, I also backed the seating die out to give no crimp at all; and gave them the very slightest bit of a taper crimp using a lee taper crimp die.

By very slightest bit, I mean all it did was fold the chamfer over and slightly increase neck tension.

My second batch I went up to 24.5gr; and I loaded to the longest length I could get to feed from the magazine without issues, 2.280"; also giving it the slight crimp.

Now, both 23.5gr and 24.5gr are relatively hot loads compared to factory .223; but neither are high pressure. The pressure ceiling on the round is 55k psi, and both loads listed should be below 50k. I plan on loading up to 26gr in .5gr increments, which should put them right on 55k; checking for overpressure signs with each increment, and then backing down one when I hit it.

Then, this weekend I went out to function test the new ammo, and new upper (using JohnOCs lower; which is substantially the same as mine, but has a standard weight buffer and spring; and a currently a standard DPMS mil-spec trigger - though he's putting the national match trigger in soon, he just hadn't installed it yet).

First news, the upper is great. Using factory federal 62gr, there was basically no felt recoil, and no muzzle rise or jump at all. Offhand, from the bench, even handheld like a pistol, the muzzle stayed on target; and I was able to watch the bullet strike through the sights (strictly irons today)

I also did a featherfire test; and I was able to light up a 10" circle with 30 rounds at 50 yards in under 5 seconds, and had no problem whatsoever.

I love those heavy barrels... so long as I don't have to hump one all day every day (I miss my bushy superlight).

We only had a 50 yard range this time out, so I didn't even bother trying to shoot for accuracy; besides which the gun isn't ready yet; I just wanted to test function; and with the factory stuff it functioned fine.

Then I switched over to the first batch of my A-Max loads, and fired off a couple. With them, there was the slightest bit of noticeable recoil; but there weren't any problems cycling at all, even when I rapid fired about 10 off at once.

Importantly, none of them pushed back, misfed, or failed to eject. They also, very crudely measured, held a 2" or so circle at 50 yards for 5 rounds. Again, I wasn't looking for accuracy here, I jsut wante to make sure everything was working OK.

The second batch were loaded a bit longer, and I expected trouble; but I didn't have any feed problems whatsoever.

Unfortunately, about the tenth round in had a failure; the bolt locked up about 3/4 of the way through the chambering stroke; and the forward assist didn't clear it.

Now, I said above I didn't have and failures to feed, and I didn't; the problem wasn't the fresh round, it was the previous one. I had blown out a primer, which had jammed the bolt.

Ooopsie.

Now I hadn't brought out my chrony so I couldn't check the velocities in question; but the blown out primer wasn't pierced, nor were any of the previously ejected rounds; and there's no way 24.5gr of 2230 should have blown out a primer.

So I chalked it up to a fluke, or maybe soft primers (and they are ridiculously soft; which is why I wanted CCI in the first place. In years past Winchester primers were harder, but if you look at the firing pin impressions on a WSR primer shot through an AR these days, you'll see what I mean).

Well, five round later, again the bolt locks. I clear it and whadya know, another primer blowout.

At this point I stopped the test, because obviously we had an overpressure problem.

...which was a good thing because a T-storm was coming in fast; and we finished packing up the truck just in time to avoid the gullywasher.

We did manage to recover all the brass though; and I just inspected it prior to cleaning.

What I found was very slightly flattened primers on both sets of my handloads; and ALSO on the factory federal loads; from both Johns gun AND mine.

Ok good, that means it wasn't my loading or my gun, but...

Now theres no way the Federals should have been overpressure and flattening those primers, so what did I neglect to take into account?

Well, this is Arizona...

... and it was 100 degrees on Saturday, and very bright and sunny before the storm came in...

...and we had left the black aluminum rifles, and dark grey aluminum magazines out in the hot sun...

There is a reason why the British used to have "tropical" or "African" loads, and standard loads for their rifles. Load pressure standards are developed at 60 degrees farenheit; and temperatures over 80 degrees can make pressures rise greatly.

Temps well over 100 (remember, black rifle black magazine, hot barrel) can take even relatively lightly loaded factory ammo, and make it flatten primers.

Combined with the hotter load, the neck crimp, and the hot barrel (remember the blow outs were only happening at the end of a rapid fire string); in retrospect blowing the primers out wasn't exactly a shocking occurrence...

... or it wouldn't have been had I remembered any of that at the time. As it was, I was worried I'd done something stupid like mis-calibrating my charge scale or somesuch; or worse, that it was my gun malfunctioning causing the problem.

My concern was that the gun was unlocking early, withdrawing the bolt from the case head while obturation was still holding the case in the chamber; allowing the pressure to push the primer out in the pocket a bit, and then either blowing the primer out; or slamming the case head back into the withdrawing bolt face as the pressure eased, flattening the primers.

This is in fact what was happening; but it wasn't because of a malfunction in the gun as I had feared, it was overpressure.

In a normal pressure situation, this wouldn't have happened; but with too much gas pressure at too high a velocity, the bolt was unlocking too fast, and the brass was sticking too hard to the chamber walls; allowing what I describe above to occur.

It's a rare day when you can say you are happy about an overpressure condition.

My thoughts on the matter were confirmed when I resized the cases after cleaning; and the small base sizing die stroke took more effort on a well lubed .223; as reforming a thick walled magnum case. That's a clear sign of overpressure (an indicator of excessive obturation).

I'm probably going to have to cull this brass out, and only use it for one or two more generations, because of the overworking.

So, anyway, the good news.

The rounds functioned jsut fine through my AR, magazine feadding from a 30rd mag with no problem at either the shorter 2.260" OAL, or the longer 2.280" OAL. They also shot very well offhand, at short range.

Next step, finish the gun; and load up some more (with even less crimp, some CCI BR primers, and a slightly lighter load for the heat of summer) so I can shoot the loads for accuracy.

Blasty Boomy Goodness

Just a quick report on our range trip this weekend.

Mel wasn't feeling well, but wanted us to go anyway, so we kept it simple; and I only took out the 1911 (because of course I can't go shooting without blasting some .45; in this case about 150 rounds), the new Hi-Power, and my new upper to function test.

The Hi-Power itself functioned flawlessly; the same cannot be said of the somewhat beat up browning factory magazine (one of 4 I got with the gun), more on that later. The 18rd KRD mags actually worked great. I also figured out the gun likes gold dots, and doesn't want to feed HydraShoks when it gets dirty (its OK clean).

I put about 150 rounds through the gun, shooting it in all manners, orientations, and speeds; and the only failures were magazine related from the dodgy mag, and the aforementioned HydraShoks.

Yaknow, I really just love the BHP design. It fits my hand great, and with the mild recoil of even +p+ 9mm in this full frame; there is no sweeter gun to shoot rapid fire strings with, even the 1911 (though it's close).

At one point while I was demonstrating rapid fire grip techniques, Kommander (the pistols prior owner) looked over at me and said 'Where did you manage to get an auto sear for a HiPower"; only half jokingly.

He then made me demonstrate again, so he could try with his SIG. I promptly emptied an entire 18rd KRD mag into a 10" or so circle at 25 yards, in about 3 seconds.

He looked at me funny; and then tried it with his new SIG p229 in .40. He couldnt manage the speed, or to keep up the strings for more than 4 shots without going way off target; but he's getting better.

Of course the point of that isn't to spray and pray; it's to learn to control recoil better so you can rapidly put more steel on more targets.

At that point we brought the rifles out, and had some fun.

Why emphasize the rifley fun goodness?

Because we'd also brought some Tannerite. Boomershoot was this past weekend, and we couldn't make it; but we could at least have some fun with boomers of our own.

Where we were shooting had some old computer monitors, motherboards, hard drives, and an old microwave scattered near the backstop.

Hehehehehehehehe.

Kommander taped his boomer to an old video card he had brought. We managed to find one small piece of it, the backplate; the rest was dust.

JohnOC put his boomer in the microwave, and blew it with his new BLR (in .308). The chassis burst quite satisfyingly, and the metal outer shell blew about 20 feet in the air with a hangtime of about two seconds.

Emily used JohnOCs new AR (his other BAG day gun. The lower was my Xmas present to him); and it took her a while to get settled in; but she blow that monitor into tiny little bits quite handily.

I also planted in a monitor and used JohnOCs AR, but I had one little extra. Remember that recalcitrant factory Hi-Power Mag? Well, the mag was rapidly reduced to it's component elements, and my monitor split in half; the lower bits becoming dust, and the top half blowing about 30 feet straight up.

I also function tested my new upper, and the experimental A-Max ammo I'd loaded for it, but I'm saving that for another blog post. I DID however use the heavy barrel to my advantage, and feather fired a full 30rd mag out in under 5 seconds (without any malfunctions, on a brand new, unbroken in gun).

Funny enough, the people who were camping and shooting the next wash over, sent someone over to ask what kind of cannons and machine guns we were shooting.

Unfortunately just about then a massive thunderstorm started rolling in, and we had to cut the day short. We managed to get packed up and in the truck just as the rain hit; scrambling out of the flash flood zone as fast as we could (we were about two miles back down a twisted and gnarly hilled wash).

Ahhh, good times.

International Buck Like Funnies Day

Today is May First, May Day as it were, and by some folks calendars this is "International Workers Day" or some other such shite.

See the Chicago Haymarket riots occurred on this day in 1886, and ever since then commie trade-unionists, including the entire soviet union (who made it one of their major holidays), have claimed it as their own.

Fuck You Commies

This day is Bealtaine, a joyous celebration of life, fertility, and birth (well, technically speaking Bealtaine is the exact astronomic midpoint between the vernal equinox and summer solstice, which falls on the 5th, 6th, or 7th depending on the year, but it's a useful stand-in).

Yes folks, May Day is all about the nookie.

Hell one of the traditional celebrations of may day involves dancing around a giant symbolic cock, wrapping it with ribbons, drinking heavily, and then going off and screwing like mad (funny how those things coincide isn't it).

Personally, I'd much rather celebrate a good rogering and a swelling belly than memorialize a bunch of commies starting a riot and then killing millions over the next 120 years.

So I say:

FUCK YOU COMMIES,
TAKE BACK MAY DAY

Monday, April 30, 2007

Getting into reloading on the cheap

I've been writing a lot lately about reloading, and the economics thereof; but I've been focused on the higher end. High volume, high speed, and quite frankly high cost.

But what if you're not sure you really want to get into it? What if you don't have the budget, or the time, to do much reloading; but you still want to get into it? What if you're just trying to make as much ammo as you can, as cheaply as possible?

What do you need?

Well (excluding components and a workspace) at the most basic level you need:

1. A press
2. A set of dies
3. Some way of measuring powder
4. Some way of dispensing powder
5. Some way of seating primers
6. Some basic case preparation tools (let's assume pistol only for this one)
7. Some basic tools for measuring the length of your cases and loaded cartridges
8. Something to hold the cases while you go through the processes of loading.
9. A way of pulling bullets out of cases (trust me, you need this)
10. A loading book or two (the internet is not a valid substitute here)

You don't NEED a dedicated workspace, or even a work bench. You can very easily bolt your press and powder measure onto a board, and then when you want to load, take a couple of c-clamps or quick clamps and secure the board to the edge of a sturdy table.

Or, if you want to get fancy, to a black and decker workmate, or any other folding workbench contraption. Those are great if you happen to want to do some reloading in the field, like when you are doing load development and want to vary charges and seating depths as you test for example.

... but, unsurprisingly, I digress...

I've said before, you can do all of this for as little as $200, and get into decent equipment that will last you a good while for under $400.

Well, let's go through that then:

Thankfully, for the reloader on a REALLY tight budget, theres only one manufacturer you need to remember, and that's Lee.

Lee make good quality products, for great prices; and they have excellent warranty and customer service. Their products are for the most part no frills and basic, they may not do everything you might want to do; but that also means you aren't paying for more than you need.
Lee (and most other manufacturers in fact) offers a very basic reloading kit that includes a single stage single station press, and most of the basic tools needed for loading; called the anniversary kit. You just need to add a few extras and you're good to go.

Let's price things out as we go (I’m going to use Midway USA prices here for reference. You can sometimes get better prices from Cheaper Than Dirt, Natchez, or Midsouth):

1. Lee anniversary reloading kit: $69

(includes):

* Lee challenger press
* Lee perfect powder measure
* Lee safety scale
* Lee auto prime
* Lee shellholders (for auto prime)
* basic case prep tools
* Lee powder funnel

to that you need to add:

2. Lee classic 3 die set: $21 including shellholder
3. Case gage for one caliber: $5
4. OAL gage for one caliber: $5
5. Bullet puller: $12
6. loading tray: $4
7. Lyman reloading manual: $17

That totals out to $133. Just to indicate the value included in the Lee kit; the retail price of the ACCESSORIES (not including the press) included in the kit totals up to over $70, and the press is $40 by itself; but the kit sells for $69, and thats after a $50 discount from MSRP.

One thing though; I think you need to make a couple of substitutions to have a really functional setup. You CAN get by with just a case length gage and OAL gage; and they are useful tools to have around no matter what; but they are very limiting if they are your only tool for measuring the length of cases and cartridges. Realistically, you need a set of calipers; and not a plastic cheapie or a low end digital (notoriously inaccurate). Get yourself a low end stainless model from a reputable manufacturer. Lyman makes one that sells for $28 (in fact, its the one I use).

Okay, so that's $18 more, for a total of $151.

Really, that's honestly all it takes to get started. If you're loading very low volumes of just one caliber, that's a great deal.

But...

For not very much more, you can upgrade to a setup that will make you much happier, and use a turret press.

If you haven't read the other articles on reloading, the difference between a single stage press and a turret press, is that with a single stage you have one tool station (a place where you insert dies) that is fixed in the press. With a turret press, you get as few as 3, or as many as 7 stations; so you can install all the dies of a die set (handgun die sets usually have three dies, but may have 4 or even 5 if you include a separate powder die and crimp die) at once.

The biggest difference is in workflow, and the speed thereof. With a turret press, you can very easily switch from operation to operation just by turning the turret (or the shellplate if it uses a fixed head). You can leave your dies set up and adjusted and not worry about switching them out between operations.

Also, if a press has a quick change turret or toolhead, you can buy spare toolheads (or spare turrets) and have multiple calibers set up in them; so you don't have to worry about changing adjustments when you change between calibers.

Believe me, a turret press cuts your loading time down significantly.

Now, keeping to our limited budget, Lee also offers several turret presses, and press kits. The Lee 4 hole turret press sells for just $64; or as a kit for $103. The Lee Classic 4 hole turret press; which is one of the strongest turret presses made; sells for just $83. Even better, if you load multiple calibers, the spare turret heads for either are just $10.

Now, you could get the 4 hole turret press kit for $102; but it comes with less stuff than is included with the Anniversary kit; and honestly I don't like the auto-disk powder measure they include. I think their "perfect" powder measure is better and more useful. Disk or bar measures are notoriously inaccurate (though consistent from charge to charge), and you have to change disks out to change the charge weight. The "perfect measure" is a screw type measure, which generally work better for everything but really large extruded powders (which do well in disk or bar types) and flake powders, which don't meter well in any measure.

One option would be to buy the Anniversary kit, AND the Turret press. That's not as screwy as it sounds, because the kit includes almost all the accessories you need (as we talked about above), for a price below what you can buy them for... and you'd have another press thrown in to the bargain (a $40 value). That would total out to $196, or $214 with the calipers (which you really should get).

That said, you may not want another press (though a second single stage press is a surprisingly useful thing to complement a turret press if you have room. I personally have two turret presses in fact). You may not have the room, or feel like spending the cash.

Going with the Turret Press Kit, your costs would look something like this

1. Lee turret press kit: $102
(includes):

* Lee 4 hole turret press
* Lee auto disk measure
* Lee safety scale
* basic case prep tools

to that you need to add:

2. Lee classic 3 die set: $21 including shellholder
3. Lyman calipers: $28
4. Bullet puller: $12
5. Lee powder funnel: $3
6. loading tray: $4
7. Lyman reloading manual: $17

For a total of $187 (vs $214 for the anniversary kit, the turret press, and the other accessories). You'll not one thing however; this setup doesn't include the Lee Auto Prime. The press itself has a priming tool; but I personally prefer (and recommend to others) to hand prime using a priming tool. The Lee auto prime is $10, plus the cost of shellholders ($3 for a single holder, or $12 for a set of 11 - yeah, the better deal is obvious) for an extra $13 or $22 dollars, brining the grand total up to $200, or $209 dollars.

$209 vs $214... for all the same accessories, and you get an extra press and a better powder measure? See, I told you buying the anniversary kit just for the accessories wasn't crazy.

Now, if you don't buy any kit at all, and just assemble the component your self, it looks like this:

1. Lee 4 hole turret press: $64 (or $19 more for the stronger 4 hole classic)
2. Lee 3 die set: $21 including shellholder
3. Lee safety scale: $19 ($30 more gets you into a pretty decent scale)
4. Lee perfect powder measure: $19
5. Lee auto prime: $10 plus shellholder $3 (I’d spend the $12 for the 11 holder set)
6. Lyman stainless dial caliper: $28
7. Frankford bullet puller: $12 (it’s exactly the same as the more expensive Hornady)
8. lee powder funnel: $3
9. Hornady 50rd universal loading tray: $4 (the same as MTM, but cheaper)

That's $192 (or $183 with just one shellholder); saving you $22 over buying the anniversary kit and the turret press together; but the items above don't include the $15 worth of case prep tools (that you don't need for pistols, only for rifles). In fact, if you buy the stronger classic turret press (either are good, but the classic is a bit better), it's only a $3 difference, but you still don't get those $15 worth of case prep bits.

Again I say, think about buying the Anniversary kit just for the accessories. It's like getting a free single stage press.

Taken independent of the press or any kit, the price for all the other bits and bobs needed to reload comes out to $118, presuming sticking with the basic Lee setup (0r $133 with the case prep bits, which you don't need for pistol but do for rifle).

Now, let's talk about why you might not want to buy any of the kits at all: upgrading the components.

The kits are certainly a great value, but they do skimp on the components a bit; most notably the powder measure, and the scale.

That isn't to say that the "perfect powder measure" and "safety scale" don't do the job, they work fine (in fact I have two Lee safety scales on my bench); but they aren't all that great. Both are slower to work with and less precise than an upgraded piece may be.

Taking these one at a time, let's start with the safety scale.

The scale retails for $19; and is the least expensive powder scale you can buy; but it does a workmanlike job for what it is. The problem is, the arm is plastic, the scale itself isn't very precise or repeatable, the adjustment mechanism is fiddly and drifts, and the scale only has a 100gr capacity so you cant use it for weighing most pistol bullets or loaded cartridges.

For $25 more, you could upgrade to the Lyman Pro 500; for $30 more you could go to the Hornady model M scale, or for $35 the Lyman pro 1000; all much better scales, and all with at least 5 times the capacity of the safety scale.

For $40 more you could go to the Lyman Model 500 or RCBS 502, better still. These are cast metal based scales, with leveling adjustments, and high precision beams with agate bearings. That means they're more accurate, and more precise (more repeatable); plus they work faster.

Finally, for $50 more you could go to the RCBS 505; which is the standard by which all other low cost balance beam scales are judged. It too has the cast metal base, adjustable leveling, metal components in all critical locations, and agate bearings. It's also a triple poise beam (there are three adjsutable weights), which gives an easier, more consistent, and more accurate reading; though honestly there isn't a huge advantage over the $10 cheaper 502.

The next step up in beam scales is into the RCBS 1010; which is pretty much the gold standard for manual balance beam scales, and sells in the $130 range.

I don't mean to knock the Lee scale; it's great for what it is. Hell, I'd guess almost every reloader starts off with one; but you wont find many serious reloaders, or competitive benchresters (the second are almost always the first) with safety scales as their primary scales (though I think just about everybody has one as a backup). The RCBS 502 and 505 though; are on a hell of a lot of serious loaders benches; and if they aren't it's probably because they've got a 1010 (or maybe a Lyman model 500 or model 1000).

The next step up is into electronic scales. Now, I HIGHLY recommend you buy an electronic scale when you can; they just make life a lot simpler; especially when weighing individual charges for rifles.

The decent electronic scales start at about $85 with the lowest end PACT model, then progress up to $100 for the low end Lyman and RCBS models. They continue up through to the $120 range for the mid grade PACT, RCBS, and Lyman models; and finish up in the $150 range for the PACT precision, Lyman 1500, or RCBS ChargeMaster scales, all of which can interface with an electronic powder measure.

So, taking that original $118 bits and bobs number (again this is independent of the press itself) and knocking it down to $99 by deleting the Lee scale; you can see that a basic scale upgrade to a Hornady M brings you to about $150, going to the Lyman 500 or RCBS 502 brings you to about $160, and going to the 505 brings you to $170 (if you wanted the 1010, that would be $230; and I think not worth it at this stage)

On the electronic side, going to the low end PACT brings you up to $185, with the low end Lyman and RCBS at $200; the midrange for all three at $220, and the high end for all three at about $250.

See, the thing is, I'm of a particular philosophy when it comes to buying durable goods (and reloading equipment certainly qualifies). I don't buy the top of the line just to have "the best", I buy for quality; and generally speaking I don't want to spend $20 now on a product and then need to spend $50 later when I have to upgrade. I'd rather just spend the $50 now; than spend $70 total to end up with one inferior product, and one superior... unless I need a spare of something anyway.

The same philosophy applies with powder measures. The lee perfect measure is fine, but it's not the best built (it's a bit plasticky). It's not terribly durable, nor is it very large, or very smooth.

There are four dominant powder measures out there for benchtop use, and those are the RCBS Uniflow, the Lyman #55, the Redding #3, and the Hornady Lock'n'load. All but the Lyman use the same metering mechanism, a drum with a piston that screws in and out to vary volume (the Lyman uses a drum with two bars that move in an out with threaded adjusters at one end of each). The Lee perfect measure uses the same system as the others actually, it just executes it in a much cheaper fashion.

I have both a Lyman #55 and a Uniflow; and I much prefer the feel of the Uniflow. It's smoother, and has a better "throw action" so to speak, as well as I think better adjustments (especially if you include the $30 micrometer drum). Either sell for about $70, or about $50 more than the lee; and can be mounted on the edge of the bench, or in a spare tools station in your press using a powder die. Bench stands that mount the measures about a foot off the benchtop are available for about $20 more each.

The Hornady measure is supposed to be excellent, and costs $10 less than the Lyman or RCBS. The Redding is used by a LOT of competitive shooters (though I believe the uniflow is most popular), but it's $40 more expensive than the RCBS (it includes a micrometer adjuster, which is $30 extra for the RCBS).

Electric automatic units, for use with electric scales, start at about $115 for the PACT and go up to about $180 for the RCBS. They're great for precision loading; but they can't throw charges nearly as fast as manual measures (for rifle loading this isn't that big a deal, but for volume pistol loading it is).

Actually, given an electronic scale though, they can throw a weighed rifle charge a lot faster (about 10 seconds), than you can throw a charge, weigh it, and trickle it up to the precise weight manually (about 20 seconds).

If you aren't really worried about volume, there's nothing wrong with the Lee; but you're going to want a better measure eventually, and why spend $20 now, and $70 later for a total of $90; when you could just spend the $70 now?

Running those same numbers, as before for accessories independent of the press, we get this picture:

$118 minus $19 for deleting the Lee Measure is $99. Going to the Hornady is $60 for about $160. The RCBS or Lyman bring us up to $170, the Redding to $210 (I don't think it's worth the difference).

To go to the electrics by themselves, would cost $220 for the pact, or $280 for the RCBS.

Now, combining the scale upgrade with the powder measure upgrade, we run from $150, $160, and $170 for the Hornady M, RCBS 502, and RCBS 505 respectively; plus $40 over the cost of the Lee for the Hornady, and $50 for the RCBS or Lyman measures (let's ignore the redding).

So keeping it all manual, that's between $190 and $210, independent of the press. With the 4 hole turret press, thats $254 to $274, and with the classic turret it's $274 to $294.

Moving to a manual measure and an electronic scale, we get $185 for the low end PACT, $200 for the low end RCBS and Lyman, $220 for the mid range of all three, and $250 for the high end of all three; plus $40 or $50 over the Lee for Hornady, RCBS or Lyman measures.

That comes out to $225 at the low end, and $300 at the high end. With the Lee 4 hole turret press, that's $289 to $364, and with the Classic Turret it's $309 to $384

So, to upgrade your scale and measure (and you really should do them together if you can) you are looking at between $70 and $100 above the Lee for the manual scales; and between $105 and $180 above for the electronic scales.

The great thing about these upgrades though, and going against what I said earlier about not wanting to spend the money twice, is that the Lee bits are only $20 each. If you want to start cheap and then go better as your budget allows, you're only out $20 or $40 going with Lee to start. Now, if you're only going to upgrade to the $50 scale and the $60 powder measure, it really makes sense to spend the extra $70 now; but if you think you'll eventually upgrade to an electronic setup, maybe waiting isn't a bad idea.

Here's the kicker; and this is why I said you may want to upgrade your powder measure and scale at the same time, leaving everything else the same:

If you want to get an electronic scale, and a manual powder measure, that's great. In fact thats what I'm currently using, and I recommend it highly.

Honestly, for $295 with the Lee 4 hole press; that's a great loading setup. You could be happy with it for years... or forever if you only loaded pistol. It's got all the things you need, plus some extras to make your life easier; and a good press.

But...

...and this is moving back into the higher end of things...

...for $220 to $260; you can buy an electronic powder measure and scale combo from RCBS, Lyman, or PACT (I prefer the RCBS). That's $75 to $115 more than a manual powder measure with electronic scale; and if you have the money to spend, it's a great deal.

Of course it's a big run from $40 for the low end Lee powder measure and scale, up to $260. At that point we're no longer reloading on that tight budget; I'm just illustrating where you can go with it. Also, I recommend that you have a manual powder measure anyway, for doing high volume pistol reloading; the electric measures are really for competitive shooters who weigh each charge, or rifle shooters.

For most reloaders, the $70 difference between the low end Lee scale and measure, and the Hornady LnL and Model M; the $110 difference for the Uniflow and RCBS 505; or the $115 to $135 difference for a Uniflow and a low end electronic scale; are very much worth it. The benefits to both speed and precision are really very significant, and you're saving time and mony in the long run.

I think most loaders would WANT an automatic powder dispenser system such as mentioned here (I know I do), but they are expensive; and I think most people might balk at $190 to $220 more than just the basic Lee setup. Also as I said, the manual measures deal with rapid reloading from the block better than electronics do.

The final place to look to for upgrades, is the press itself.

This time I'll make no qualifiers; I think the Lee classic turret is as strong and well made as any other press out there... but... I don't think it's as tough as some, or as well finished etc...

What I mean by saying it's as strong but not as tough, is that I think it will take a hell of a lot of force applied to it; but I don't think it will stand up to as much use and abuse over its lifetime as some other designs; because it's a bolted together press rather than a cast frame.

Also, the Lees have one major weakness; they only have 4 stations. This means you can't have two pistol calibers set up at once; and if you are using a powder die, you can only use a 3 die set instead of a 4 die set (4 die sets use a separate seating and crimping die; and you generally get better results with them).

The Lees do somewhat make up for having only 4 holes by offering very low cost quick change toolheads ($10 for lee, vs $35 for Lymans quick change turrets, and RCBS at $40), but I like the ability to use more tool stations offered by a six hole turret press like the Lyman or RCBS.

The Lees also share an advantage with RCBS in that they can be used in an auto indexed mode. This feature allows the presses to operate somewhat like a progressive press, where each pull of the handle rotates the tool head, so four pulls on a case (decap and size with priming on the up stroke , expand case mouth, dispense powder, seat and crimp) produces a loaded round.

This seems at first like a big advantage; but without automatic priming, and automatic case feeding and ejection, it doesn't really increase production speed all that much; and it reduces the durability and increases the mechanical complexity of the press.

If it's auto-indexed like a progressive, why doesn't it increase speed very much (if at all, over batch processing)? After all, progressives are three to eight times faster than loading on a turret press.

In a progressive press, because there are multiple cartridge stations as well as multiple tool stations; all four operations are performed simultaneously, and a loaded round is produced with every stroke of the handle. An auto indexed turret press only has a single cartridge station, and therefore just like a manually indexed press, still takes 4 pulls (presuming a press mounted powder measure - 3 pulls if you're charging on the bench not the press) for every round.

Honestly, the only real time savings is that you don't have to rotate the turret by hand with each pull; or if using batch processing, you don't have to put the cartridge back into the press three times (in batch processing you don't use the press ram to dispense powder, you manually charge each case with the powder measure in large batches). Personally, it's a nice to have feature for some, but I don't care for it unless it's on a progressive press with a case feeder.
As an aside: Just to make things more complicated, Lee sells a fully progressive version of their 3 hole turret press called the Pro 1000. It runs $65 stripped, and you need to buy a priming system for $13, a shell plate for $24, a case feeder tube for $10, and a tool head for $10. Or you can buy it complete, with a case feeder, powder measure, priming system, shell plate, tool head, and a single set of dies, for $132.

That's actually CHEAPER than buying the manual turret press, and the associated gear to do the same thing the progressive does (and is in fact cheaper than either Lyman or RCBSs turret press alone).

The only concern I have with it, is durability. As I said, the 4 hole design is strong, but I have concerns about its service life; and I can't really recommend it.

To muddy the waters even further however, Lee makes what is essentially a fully progressive version of their challenger press called the load master; and selling for $215 fully kitted out with powder measure, priming system, case feeder, and die set.

The load masters frame is every bit as strong and tough as a Dillon press; though the case feeder, powder measure, and priming system wont stand up to as much...

But honestly, for $215... thats half the price of a Dillon. Sure you wont get the speed, or service life, but it's $215; and the replacement parts are cheap.

I'm in the market for a Dillon, because I need that additional speed and toughness, most loaders on a budget really don't. If you need to load more than 500 rounds a month of a single caliber, then I'd really recommend going for the LoadMaster.
Anyway, let's leave aside those progressives for a minute.

It may be a combination of personal preference, convenience, and value; but I just like the Lyman T-Mag. It sells for just $140 ($60 more than the Lee classic or $80 more than the 4 hole), and I think makes an excellent upgrade. I have two of them myself, that's how much I like them.

To go to the T-mag and keep everything else the same as above would run from $260 for the full basic Lee outfit, to $330 for the upgraded manual powder measure and scale, to $390 for the Uniflow and a low end RCBS or Lyman electronic scale.

Lyman also offer the T-Mag II in kit form, for either $295 or $365 (the former for mechanical scale, the latter for electronic).

This includes:

* T-Mag 2 Turret press
* Universal Trimmer with Expanded Pilot Multi-pack
* Lyman 1000XP Electronic Scale (normally $100), or Pro 500 scale (normally $45)
* #55 Powder Measure
* Universal Priming Arm
* Primer Tray
* Auto Primer Feed
* Extra Decapping Pins
* 48th Edition Reloading Handbook
* Primer Catcher
* Deburring Tool
* Powder Funnel
* Case Lube Kit
* Quick Release Turret System
* 7/8” x 14 Adapter (mounts #55 powder measure in press turret)

All you need other than that is a die set and shellholder, for $22 total; and an autoprime with shelholders if you don’t want to use the presses autopriming tool for another $13 or $22; a bullet puller for $12 and a loading tray for $4; or $38-$60 over and above the kit price.

That works out to $355 or $425 total (for manual or electric scale), and you get a case trimming lathe and bits included with it. That's compared $275 or $295 for the manual scale and Lee 4 hole turret or classic turret; and $310 or $330 with the electronic scale.

For $60 or $80 more, on the manual side; or $95 to $115 more for the electronic; you get a better press, and the same or better kit to go with it. Plus you're getting a case trimming lathe and all the accessories; which is worth... you guessed, it, about $80 ($60 for the trimmer, $20 for the bits and collets).

If you are just going to reload pistol, you don't necessarily need the case trimming gear; but it's a good thing to have.

RCBS makes a great turret press that sells for $175, and a kit to go with it; but they want about $60 more for it than the Lyman kit; and the lyman kit has a case trimming lathe (a very useful thing when you load rifle). On the plus side, the RCBS kit includes the 502 scale, a much better scale than the pro 500 in the Lyman kit; and it also includes the UniFlow powder measure, a better measure than the Lyman 55.

Actually, I really wish they'd take the Rockchucker supreme kit; and substitute the turret press in for the 'chucker and call it a day. That kit includes the 505 scale, and the RCBS hand priming tool; both excellent choices.

The Bottom Line:

It takes as little as $135 (or really $160) to get in, but it's really just over $200 for a reasonable setup. Seems another $80-$150 and you've got some really great gear there; and for another $200 or so over that, and you're into the luxury zone with electronic automatic stuff.

That's $200 for a basic single stage turret and all accessories; to $300 for a very reasonable, high quality setup with upgraded scale and powder measure; all the way up to over $550 for a top quality press, and electronic powder measure and scale; with a lot of room for a variety of budgets in between.

Don't ever say I didn't give you options...

My recommendation for those on the tightest budget? Make it stretch to include the 4 hole turret press outfit as listed above(not the kit) for $192 (or even better buy the turret press AND the anniversary kit for $214).

If you can swing the money to upgrade the scale and powder measure, do the measure first at an additional $44 for the Hornady, then for $40 more, upgrade your scale to the RCBS 502.

Thats $85 more than the straight low end Lee setup; or just about $275.

If you are going to load a lot of large or magnum rifle, or you plan on doing any brass forming (modifying one brass case into another type); upgrade to the classic turret press for another $20 or $295 total; or spend the $80 over the 4 hole, and go to the Lyman for $355.

Just for comparison purposes, my own personal setup is made up from the pieces I describe above:

I've got two Lyman presses, the RCBS uniflow powder measure and the Lyman #55, and pretty much all the other Lee bits except dies (I'm using Lyman and RCBS dies). When the money allows, I'll spend the $260 on the RCBS automatic powder dispenser and scale (for now I'm using a low end electronic scale with a Lee Safety for backup).

So yay, for $350-$400 you can be just like me (or at least just like my setup anyway, without the extra turret press and powder measure); or for $550 kick my butt with your automatic electronic goodness.

Or if you are doing a lot of volume in a single caliber, you could even go to the Load-Master progressive, with accessories and an electronic scale, for under $400; and REALLY kick my ass.

Until I get my RL650 that is... bwahahahahahaha, then I shall take over the WORLD!!!

Oh, did I say that out loud? Sorry, disregard immediately.

It's 2am, I've been up since 6:30 after 4 hours of sleep, and I can barely keep my eyes open. I'm sure I've written a bunch of gibberish above, but I'm too tired to proofread it. I'll fix it in the morning when I wake up.

BOHICA



HT: Sondrak