Appholes

Just watch the whole thing:

The Daily Show With Jon Stewart	Mon - Thurs 11p / 10c
Appholes
www.thedailyshow.com
Daily Show Full Episodes Political Humor Tea Party

That's Why We Moved Here

(although we're in a far more mountainous portion of the state)

From Oleg:

Of Idaho
These rolling hills are Irish-Green
But those who herein dwell
Have rifles that reach a mile
To send Cromwell's hosts to hell

To them Ruby Ridge was a warning
An alert to the fair and free
Like other, more recent incursions
Against them and you and me

Enjoy rolling hills of Idaho
They look Irish but hold more lead
In case someday reason fails
And the living might envy the dead

The Federal hydra seldom
Comes into these rolling hills
To it the climate is noisome
Though the locals are dressed to kill

Plain are natives of green and beauty
Simple and rough their talk
But they have enough math to know
How far long-range bullets drop

These rolling hills are Irish-Green
But those who herein dwell
Though wishing for peace and quiet
In war would do rather well

To them you are valued visitor
By whom they strive to do right
Those who come in friendship
Need not fear the rifles' might

These rolling hills aren't Ireland
But a more formidable land
And despite all the Pharaoh's armies
These people will win in the end

WF, WHF - The Importance of Good Design

There's a new post up at We Few:

In the last 6 weeks I've fallen down our stairs twice.

Twice.

Not the outside stairs. Not the stairs to the basement. The loft stairs that lead from the main floor to the master suite.

They're fully enclosed, carpeted, and of spec but of bad design.

Oh yes, indeed there is

New Blog - We Few, We Happy Few

Chris and I started another blog detailing our journey from suburbanites to rural Americans.

We Few, We Happy Few, a blog dedicated to rural life, culture shock, and the quest for Crispin Ranch.

We already have a few posts up, including some background and our purpose, a post on shopping by the side of the road and the characters we've met, and the joys of dogs and fencing.

The AnarchAngel with remain more dedicated to guns, geekery, and politics.

We felt we needed a more... focused outlet for the changes our life is going through, and why we moved where we are.

Posts will be linked up of course.

Hope to see y'all over at the new place.

Mel

Another Trip 'Round The Sun

Today, is my birthday, and I woke up on the right side of the ground; so it's a good day.

I am old enough to know better, and young enough to do it anyway... but still, old enough to feel the pain afterwards.

I may write today, I may not. I most certainly will NOT login to work today (though the blackberry... It's just easier if I keep up. I get a couple hundred emails a day some days). I most certainly WILL read, and relax, and enjoy my wife, and kids, and dogs, and lake.

More Scenes from My Marriage

Mel: Did you give him his ass reaming?

Chris: Yeah... well, it was a polite and relatively gentle ass reaming...

Mel: If it's polite and gentle, that's not a reaming, it's a rim job

Scenes from My Marriage

Chris: "I like this guy... He builds his boats in his living room"

Mel: "... Yeah... no..."

Chris: "Of course not..."

Chris: "Our living room isn't NEARLY big enough..."

Anything better than a roaring fire?

We've got one of those woodstove inset fireplaces; and damn is it effective at heating our house.

This one fireplace can heat the entirety of the top two floors, no problem.

With decent wood, and throttling down the flu damper (to slow the burn); I can get 6 standard splits in there and heat the house all night.

Or I can open it wide with 3 or four splits on (for more airflow) and they'll burn down in 90 minutes; having raise the temperature in the house from under 40 to over 70 in that time.

Now, it's off to the hot tub, while the house get's toasty.

Not Enough Gun

So now that we've moved to Northern Idaho, I've decided my carry gun is inadequate.

My carry piece is a Kimber Aegis 9mm 1911. I love it, I adore it, I couldn't be happier with it.

But 9mm ain't gonna do the job anymore.

Anyone who wants to pontificate on the wussy nature of 9mm, go right ahead, I'll ignore those comments like usual. I chose the Aegis for a reason; it was the best balance between weight, conceal-ability, power, and ability to do the job that I could find.

When I bought the Aegis, I had two major concerns: the ability to concealed carry, and the ability to take down my two biggest threats. I believe that my carry piece should also be useful if I get stranded on the side of the road. Arizona, and the route between our house and my dad's in particular, is full of desert and long stretches of wilderness. After human predators, my biggest worry was coyotes and the 9mm would take care of either. I also carried a Marlin Camp 9 Carbine in my vehicle for the same reason and for ammo commonality.

Now instead of long stretches of desert I drive through long stretches of forest. Instead of coyotes, I have wolves, and deer, and elk, and black bear. 9mm ain't gonna do it. I need something with more punch.

On top of that, this region is *mostly* empty of hoplophobes. Even the hippies carry guns here. I don't NEED to conceal carry anymore, so ability to conceal is no longer an issue. I can carry as much gun as I want without worries, without calls to police, and without being pestered with anything more than, "hey, whatcha carrying? I'm carrying such-and-such." The only time I need a small handgun is when I'm going to the mailbox or going into Spokane, and I have the PF-9 for that.

So regretfully, since I refuse to keep firearms I won't use, I'm putting my Kimber Aegis and Marlin Camp 9 up for sale.

*Sigh* I'm going to miss those two.

Mel

Splinters...

So, I didn't have a BAG day gun this year... Mostly because we bought two home defense guns just before I moved: a new AR carbine, and a Saiga 12 conversion (I'll do some pics of those soon). Then moving went almost $8000 over planned expenditures and I am broke for the month of April (plus all my March bonus for 2009 is bye bye).

...But...

I did find something on tax day this year... something very interesting... and I got to check it out and make the purchase decision today (we'll be picking it up from the owner, with cash in hand, after my next check).

Knowing I didn't have the money yet, but wanting to keep abreast of things, I'd been scanning the local nicklesworth,and craigslist, for boat ads. A very interesting one popped up on tax day... and now... well...

Here are some pics of my new project: An all wood 1970 Carver Custom Cruiser.

It's similar to the '69 Monterey 2580, but  I've got the original dealer bill of sale and options sheet (and all the original user manuals, and the first 10 years of records, which is very cool), and it's labeled as a "Carver 25' Custom Cruiser", not a "Carver Monterey 2580"; and the builders plate doesn't have a model or series number.

I think it might have been a hull that was assembled with power in '69 (the stern drive is a '69 OMC. I've got the original manual for that too); but wasn't completed, as a '69 leftover, until 1970.

It's FULLY optioned up, with all the optional hull and cabin teak, the extra instruments (aqua meter including compass and depth sounder), electric windshield wipers, the chrome horn, the monomatic electric head, the propane stove, shore power, the teak steps and boarding ladder (the ladders not mounted at the moment), ALL the factory canvas (mildew free, amazingly), the extra handrails and "custom" bowrail, even the original curtains, and the contrasting top stripe on the hull (though it's been repainted since).

Everything is there, everything is functional, and most of it is in pretty good shape.

Here's the link to the factory brochure from 1969 (Carver is a great company, and they really appreciate their history. Warning, PDF). Here's the 2580 page from the brochure:

It's got an OMC 210hp motor (a GM 307 small block V8); and the last owner put in a new carb and exhaust logs. The motor runs strong, and clean, and sounds good.

The hull is sound with no rot, and just a few sprung or loose planks (easy fixes), and the wood is in great shape.

I did screwdrivers tests all over the hull inside and out, and didn't find a single soft spot in any structural or cosmetic wood (some of the plywood decking was a bit week, but not rotten); though there are some rubrail repairs and patches made with the wrong screws. 

It runs, doesn't need much pumpout (like any wooden boat, when its out of the water, the wood dries and shrinks; and when you put it back in the water, it will leak a fair bit until the wood swells), doesn't smoke, and doesn't burn oil.

The guy has run it all season for five seasons; he just hasn't had the time or energy to complete the project work... and his wife likes their 28' party barge a lot more.


I picked it up for less than scrappage value (seriously, it wasn't free, but it might as well have been). Oh and the custom trailer comes with it of course...


...WAY below scrappage value...



A functioning stern drive, with a decent condition small block in front of it... at least $1500.
The trailer alone would have cost me more than $1500.

I didn't pay nearly that, for the whole thing.



Now I just need to scrape, sand, seal, and stain or paint; 4000lbs of 40 year old mahogany...

Views from an Evening

People have asked me, "why did you move?"

Oh... I don't know...


















I kinda like the view...

Tried it.. didn't like it

Click to embiggen (From Applegeeks)...

So... the doubledown...

First, dry, not very good chicken. Such is the KFC chicken sandwich (the only things I particularly like from KFC are their chicken strips, potato wedges, and mashies and gravy) whose nominal filling serves as the "bread" of this sandwich.

The bacon? Thin, not particularly crisp, and without flavor. The cheese? Thin, greasy, and without flavor.

The worst part though, is the "special sauce". It tastes like a combination of mayo, cheese whiz, and hot sauce... and NOT in a good way.

Oh, and it costs $2 more than their chicken sandwich.

Personally, I'd just get two chicken sandwiches... or really, I'd eat somewhere else.

Happy Birthday

To my brother, who hit 31 today (and we thought he never would).

To our nation, which entered frank labor 235 years ago on this day; patriots day.

PT, good for you, good for me

PT can have a couple meanings. To anyone who served in the military of course, it means (officially) "Physical Training" (unofficially, there are a number of other, and more creative, names for it), and has a certain association with pain... And for anyone who's had serious orthopedic injuries it means "Physical Therapy"... and has certain associations with pain...

The constant there seems to be joint and muscle pain.

Now, for my money, the best relief for joint and muscle pain is the hot, wet, pounding (dirty bastards... besides, that causes MORE joint and muscle pain... even if it is worth it) of a nice hot tub/spa.

As it happens, I've been doing a bunch of yard work recently (fence mending, constructing yard shelter, felling and splitting wood etc...); and my new house has four different sets of stairs for me to deal with (two bad knees, overweight, and stairs... joy).

Thankfully, our new house ALSO has one of THESE:



Actually, particularly, a Dolphin Spas Luxor:



Oh lord, how I love hot tubs. I can't even tell you. If you happen to have a bad back, or bad knees, you almost certainly know what I'm talking about.

We filled the hot tub yesterday around noon, and I expected to have to wait 24 hours (as I had in all my previous hot tub experiences); but the thing had hit 104 (from 48 degrees to start) by 7pm.

By 9pm, we were relaxing in the tub, and stayed in there 'til almost 11.

Late night, cold (about 45) clear, with a new moon and bright stars reflecting off the lake, geese honking every once in a while; in a hot tub with my wife.

Heaven.

Now, there's the physical therapy, where the physical torture... uhhh I mean training?

Well, in other good news, I've lost 40lbs in the last six weeks. Yay me...

Of course a non trivial portion of that is from the pneumonia; but hey, 40lbs is 40lbs.

Just PART of that loss is from the illness though; the other part is that I'm being much more active, and eating somewhat less than I was in AZ.

In general, the atmoshphere here is just better for me. I like it more, I have more fun, I can spend a lot more time outside (even in the cold. I just prefer the "feel" here).

What I can't do right now, is work out. When we moved, we gave away our home gym, and our excercise bike.

I really liked our smith machine, but it was always a bit limiting for me anyway; and we really didn't want to (or for that matter, really couldn't) carry that extra thousand+ pounds of weight with us.

I've noted before my feelings on gym memberships vs. home gyms; and moving to the middle of frikken nowhere has only strengthened that opinion. For me, where I live, it's a home gym or nothing.

So, more PT... and in my case, it's really both, since the more I exercise for fitness, the more I reinforce my joints with good muscle tone etc... (presuming I don't overdo it).

So, I figure, this time I'm going to get what I wanted when I was buying last time. Again, I liked my smith machine, but it wasn't exactly what I wanted... it was just such a great deal (massive clearance) that I couldn't say no.

And I do LIKE smith machines; but they have disadvantages. For one thing, you can only have one station active at a time. For another, although the motion is generally good, it's not good for squats (it causes hip issues), or leg presses; and it requires a lot of reconfiguration while you're working out.

What I really want, is a powertec leverage machine; and they cost less than half as much as they used to (they were well over $2k when I was looking last time) so I'm going for one:



That is the Powertec WB-MS10 leverage gym; and with a couple add on accessories (leg press, leg lift, pec fly, all $130 each) it does everything I want.

Check out the video, and you'll see how versatile these machines are.

Add an accessory bench ($250), and you can actually set one of the other accessories (the leg press, pec fly etc... above) on it, and have four stations ging at once if you like; or have a dedicated station, or use it as a crunch bench or a dumb bell bench (which is what we'll do).

The only thing I'm trying to decide, is whether I also want to grab their power rack, since I'm already getting the accessory bench and accessories (that's the accessory bench in the picture with it):



There are a few exercises that the power rack is better for (like squats, and bench pressing), but the only thing set of excercises I can do with a power rack that I can't do with the leverage machine; are safety dead lifts, cleans, and clean and jerks (doing lifts inside the rack). Also if you get the lat tower, it gives you a few more options for pulling exercises (rows, lat pulldowns etc...)

Watch the video, you'll see what I mean.

I've got the floor space for it, and it's not much extra money for one, but I'm not sure if it's worth it.

If I get the power rack, I'm going to want two 700lb plate sets anyway; just so I don't have to move plates around all the time. If I don't get the rack I can probably get away with a 700, and a 300 or 500.

Oh and of course we'll need a dumb bell set. Not sure if I'm just going to grab the cast iron bells, or a couple sets of olympic bars and a small plate set. I don't much feel like dropping $500 on a decent set of bells, and if I'm getting two 700lb plate sets, I've got to do SOMETHING with all those 2.5 and 5lb plates they stick in the things.

Of course we also need cardio; and I need a 0 impact solution, that can work with my bac back, ankles, and knees. For me that leaves pretty much just recumbent bikes.

I'm thinking about this one, a Diamondback 500sr:



It looks good, I like the features, it gets great reviews, and a decent price. The only problem being the "user weight limit", but there isn't a single consumer grade bike that doesn't set their limit that low.

Now, all of these aint cheap... Probably around $3k or a bit more total (and thus aren't in the budget yet. Debt service and a new transmission come first); but neither is a good local gym (and near as I can tell, there ISN'T a good local gym. There are four gyms in the area, but they're all of the "Curves" variety. The nearest gym with adequate facilities for me is 35 miles away).

This is a full gym setup for me, and my wife (and eventually, the kids), and if we can find some friends to work out with, for the next ten years...

... and we'll actually use it, unlike our gym memberships. Worth every damn penny.

God damn !@$%@#$&%@#$%!

Blogger just ate a 2000 word post on CCW for women... First good gun piece I write in a couple months and !$%@#$^@!$%!@#$@$%^&#^%&#%^*%&*($#%$^!#@$!$%!$

Ok, I'm irritated right now.

I'll try and re-write the damn thing tomorrow.

Indeed...

I THINK I have a decision about the saw

Firstly... I get more comments on a chainsaw post in one day, than most of my gun or political posts ever get.

Actually, ANY tool posts get a lot more comments. People who never comment on anything, go for the tool posts.

Second, I think I have a plan of action for the saw.

After a bit more research, I've decided that I can afford to go a little smaller than the 70cc models. I'm thinking I'll save the weight, and the money (around 30%), and go for one of the pro 50cc models. The landowner/homeowner 50cc models don't have the juice for what I need, but I think with the pro models, I can get away with the 50s.

If I end up needing a 70cc saw (or bigger), I'll buy it later; but for the next two years (until we buy the big property), a 50cc ought to do it for me.

Realistically, I think anyone looking to do a lot of cutting and clearing needs three saws anyway: one smaller model for light trees, brush, and light limbing (the Poulan is perfectly adequate for that); one medium sized saw for felling medium trees, bucking small and medium trees, and heavy limbing; and one saw for BIG tree felling and bucking (a 28-32" 80cc or bigger).

For the next two years, I won't need to be felling or bucking anything more than 24"; and I should be able to handle that with a strong 50cc, with a 20" bar, maybe even a 24" bar (which I think is iffy on a 50, but I don't plan on cutting big hardwood with it. The big ones are all birch, pine, fir, and tamarack. You want at least a 70 to pull a 24" in hardwood).

Oh and thanks to True Blue Sam for the tips on bore cutting etc... I learned the old way, with saws that didn't have the power to do that; and my instructors always jumped HARD on NEVER burying the kicking edge of the nose (even with the attack edge engaged). Even if you didn't kickback, they were dead certain you'd stall the chain (and with the saws we had, you would).

When I had to deal with hard cuts, I was taught to roll in and angle cut at the dog end of the bar, back to the attack edge of the nose, and back again; then cut out the angle created by that, and start the cycle over again.

If you do it right, you keep the tree from pinching the blade out while you're hinging; and you can attack a harder and thicker tree with a smaller and less powerful saw than you would ideally wish (I learned on old, crappy, low powered saws).

Of course, if you do it wrong, your hinge fails. Obviously, the bore cutting technique works better. You can take a much harder tree, much faster and safer, with bore cutting. Theres just a lot fewer ways for things to go wrong, leaving a backstrap on the tree.

At any rate, I'm going to go for a strong 50cc class saw, unless someone with the right experience convinces me otherwise.

I've narrowed it down to the Husqvarna 357xp (56.5cc, 4.4hp, 13-20" bar, 12.1lbs)



and the Stihl MS362 (59cc, 4.6hp, 16-25" bar, 13.7lbs).



The Husky is a fair bit lighter, the Stihl has a bit more power (I think the 25" max bar rating on the Stihl is a bit optimistic, and the Husky can probably pull a bit more than 20" without much trouble... Maybe a softwood rating for one, a hardwood rating for the other), they both run about $650 street. They both have a lot of fans, and a lot of detractors (chainsaw partisans are as rabid as any other tool partisans).

It's been a while since I looked seriously at new heavy duty saws. When I bought the Poulan, it was because I could get a 42cc 18" saw for under $150 out the door; not after extensive research (unusually for me). The new motors on these pro saws... Damn. 25% more horsepower for the same displacement as a few years ago; and the power to weight is so much better it's crazy.

What I'm going to do, is visit the Husqvarna, and the Stihl distributors for the area (there are actually one for each with 10 miles, and 3 for each within 30), take a look at both saws and at both dealers. Unless one or the other saw is clearly better in my hands, I'll make my decision based on which dealer/distributor network I think will give me better service.

With a pro saw, it really is about the service.

Free firewood... but I think I need a bigger chain saw

So, while we were gone; there was a big wind storm up here, that took one of our trees down (and a fence slat or two, and some other minor damage).


I'm pretty sure that's a birch of some kind. Not sure which, since the thing is so mossy, and in pretty rough shape anyway (and it's been 20 years since my boy scout tree identification lessons).

There are a few more, similar, trees on the property that I really need to take down. A few shorties, some of which have been topped off by nature already; and couple MUCH taller than this little boy (in the forty foot range), and consequently much thicker through the main trunk and stump.

It took me a couple hours to reduce just that little one to logs, using my 18" Poulan Pro; and I had to make four cuts at the base, which was less than a solid foot thick, to avoid binding, or lugging and stalling.



This little saw has served me well for the last couple years in Arizona; but it just can't handle the trees out here. It's really a light duty saw, for limbing and the like. I picked it up on a massive sale for I think $119, and used it to clear overhangining limbs etc...

Note: Several people in comments have noted that I should be able to take that tree... or a 24" for that matter using my current saw; and I agree, I SHOULD be able to. It's a 42cc saw, it SHOULD be able to do so, providing I am using the right technique.

Thing is, I AM using the right technique. I'm not a novice at running a chain saw. I learned as a teenager PROPERLY, in the New Hampshire woods from experienced firewood cutters.

I AM out of practice however. Although I used the thing every month or two for maintenance; it's been... I guess 7 or 8 years since I've had to fell and buck any trees. I could certainly use a refresher, but I've been reading True Blue Sam (a pro) and some other resources on the web, and I'm not doing anything particularly wrong).

She cut fairly easily on shallow cuts, and not so bad on the short face cuts. It was whenever I had more than an inch or two of the blade bearing on the wood (on a relatively soft wood like Birch you SHOULD be able to get 4" of good bearing surface, even from a 40cc saw on an 18" bar without bogging in any way), had the blade buried much (of course, keeping the tip cleart) or when I had a knot I couldn't avoid that she bogged down badly.

I even stalled the chain a couple times, on cuts that really shouldn't have stalled the chain, though that's where if I had been more in practice I could have avoided it. I paid closer attention after the second time, and didnt stall again.

Also, she got a bit hotter than I like, even cutting that bitty tree... Though I suppose part of that poor performance is me running it with an anti-kickback chain. My current chain is reasonably sharp (I haven't sharpened it recently, but it's not bad. Could be better...) , but I'd certainly get better performance out of it with a new, non-safety chain.

Also, someone noted that saws are classified by displacement, not horsepower; which I was also aware of, but most people reading this post (like my wife) would have no idea what the difference between a 40cc, 50cc, or 60cc saw was, other than "is one bigger?".

Now, I'mna need a real felling and bucking saw; and you all know my philosophy about tools: Either buy the cheapest thing that will do the job, or buy something that will do everything you need for life (or twenty years, or however long a reasonable expectation for that tool might be).

I plan on using this to clear land later on, with trees up to 24" thick. I'm also going to use it to buck out said cleared trees for firewood.

Accordingly, I'm thinking about a 60cc or 70cc, 5+hp 28" or so Husky:



or Stihl:



I don't really NEED one of the big 7 or 8hp Husky XPs. My neighbor has a 93cc, 7hp 32" Husky 395XP, and it's a damn nice saw; but it streets for over a grand, and that's just too much for something I'm not making my living with. Besides which, it's a heavy bastard.

The problem is, there's a HUGE gap between say, the 390xp (87cc, 7hp, 18-28" bar, streets at just about $1k); and the top end of their "landowner" line, the 359 (59cc, 4hp, 13-20" bar, streets at just under $500). The 359 is a good saw, but it's only got a bit more capacity that my little Poulan (for a lot more money).

Frankly, I don't think anything MUCH smaller than the 390 is going to do the job I want.... or rather I'm pretty sure the landowner type models WONT do the job particularly well, or hold up to the duty for years; and if you're going to buy a pro model, the prices are all pretty close together.

There are other saws in between the two, like the 70cc, 5.5hp 372; but it streets for just $100 less than the 390, for considerably less capacity. I'm sure it could do the job I want to do, but for $100 more I could get the $390... Not sure if it's worth the difference or not, plus the 372 is 2lbs lighter.

Husky doesn't have any 60cc saws, and I'm not sure if the 50cc saws are enough. They jump from the 50cc class, to the 70cc class (and from 4.4hp to 5.3hp, and 20" max bar to 28" max bar).

Stihl gives you more options (they have a ridiculous number of models), but the prices are in about the same range.

I figure for what I want to do, the 441 (71cc 5.5hp, 16"-32") or 460 magnums ( 77cc, 6hp, 16"-32") are about the smallest that will have the capacity for what I want; though the MS362 (59cc, 4.6hp, 25" max bar) might do the job as well.

So, I know theres a bunch of experienced loggers, land clearers, firewood cutters and the like out there reading me; what do YOU recommend for clearing, bucking, and other use up here in the north woods?

Update: I THINK I have a decision about the saw

Falling over, but at least into our own beds

It's amazing how fast the miles are eaten up, when you've got the cruise control locked at 84mph.

No matter how fast though, there are still 1500 someodd of them, between the reception hall, and home

No matter how comfortable, smooth, fast, and well appointed your car is, it's still not very fun having to spend 24 driving hours in it.

Doing it for the second time in just less than a month, while still recovering from pneumonia... Yeah not fun at all.

So the numbers... 1522 total miles (including a detour or two), at an average road hours speed of 65.6mph. We did it in 24 on the road hours with about five hours in gas and food stops, for 19 hours actual drive time; so our actual driving speed average was just about 80mph (which is about right, since I wasn't kidding about having the cruise locked at 84 almost the entire way).

That's actually a lot better than we'd planned. It's pretty hard to make a road hours average of much more than 50mph on most trips; and an actual driving speed average of 80 is DAMN good.

Our average mileage en route was 24.4mpg, for a total of about 63 gallons of gas burned; which was also a lot better than we'd planned. This is especially true, because we were doing 84 the whole way (including through the mountains, both up and down). During some stretches where we were limited to 74 (I kept it to plus 9) I was seeing sustained 28.7mpg.

We did two overnights, taking it a bit easier than the last trip; so our total time enroute, was 41 hours, for a total trip average of about 37mph.

However, even taking it easier, and much more comfortably; we still managed the trip in 7 fewer driving hours, and 13 fewer hours overall than with the truck and trailer. Don't even need to talk about how much better average speed, or how much less fuel etc...

Oh and no blowouts, and no mechanical damage.

Overall... It was a much better trip than the first time. The kids were great, the car was as comfortable as any car can be for so much time in it, and we enjoyed some audiobooks along the way.

The kids are freaking out about how awesome the new house is, and the dogs are freaking out at how awesome it is to have the girls back.

We're just exhausted, and are about ready to fall over for a day or so.